Product Description
Made using beautiful natural pine, the Fakro Z-Wave Electric Center Pivot FTP Natural Pine Roof Window adds a warm, inviting touch to any room. The built-in ZRD rain sensor automatically activates the sash closing function when it starts raining, protecting your space without manual intervention. Its adaptable design allows it to be fitted to roof pitches from 15 to 90 degrees and comes in various sizes to accommodate different spaces. This unique window enhances your energy efficiency and usability, making it the ideal choice for those seeking the best in roof window technology.
- Available in Different Sizes
- Traditional centre pivot operation
- Electrically operated pivot roof windows equipped with the Z-Wave system as standard
- Integrated window control mechanism is situated under an aesthetic aluminium cover fitted in the lower part of the frame
- Easy connection to the mains supply 230V
- Centre pivot window with factory-fitted equipment (switchboard, motor and transformer)
- Remotely open, close and control accessories via the remote control
- Actuator with a reach of 24 cm makes it possible to open and close the sash
- Built-in ZRD rain sensor automatically initiates the sash closing function when the first rain drops appear
- Suitable for pitches from 15-90Deg
- Finish - Natural Pine
- High quality close-grain vacuum - impregnated redwood pine guaranteed to be knot-free
- Finished with natural acrylic lacquer
- V40P automatic air vent to prevent unnecessary heat loss
- Glazing - P2 - Safety Double Glaze
- Single chamber glazing
- Laminated and anti-burglary class P2A according to standard EN 356
- Increased resistance against breakage
- Consists of external toughened pane with easy maintenance layer
- Warm TGI spacer and inner pane has two 3mm thick sheets of glass with 0.76mm layer of PVB plastic membrane between them
- Glazing cavity is filled with inert gas- argon
- On the inner side of the laminated glass it has a low emission coating which reduces penetration of UV rays by up to 99 Percent
- Glazing - P5 - Anti-Burglary Triple Glaze
- Double chamber glazing
- Laminated and anti-burglary class P2A according to standard EN 356
- Offers increased resistance against breakage
- The glazing cavity is filled with inert gas- krypton
- Warm TGI spacer
- On the inner side of the laminated glass it has a low emission coating which reduces penetration of UV rays by up to 99 percent
- Flashing - EZV-A
- For interlocking tiles up to 45mm profile
- Ideal for fitting windows with profiled roof coverings such as roof tiles and metal sheeting
- Universal flashing which can be applied not only to corrugated coverings and roof coverings with a profile depth of up to 45mm
- Applied to individual windows in the slope of the roof
- Used as flashing for windows used in group for V depths in horizontal, vertical, and block
- Roofs with pitches from 15Deg to 90Deg for depths V
- Depths in the roof construction V - (0cm)
- Flashing - EZJ-A - Recessed Style
- For interlocking tiles up to 45mm profile
- Ideal for fitting windows with profiled roof coverings such as roof tiles and metal sheeting
- Universal flashing which can be applied not only to corrugated coverings and roof coverings with a profile depth of up to 45mm
- Applied to individual windows in the slope of the roof
- Used as flashing for windows used in combinations for depth J in horizontal
- Roofs with pitches from 20Deg to 90Deg for depths J
- Depths in the roof construction J - (–3cm)
- Flashing - ELV
- For non-interlocking slate up to 10mm thick
- ideal for fitting windows within slated roofs coverings up to 10mm thickness
- Applied as standard to individual windows in the slope of the roof
- window units combined for V depth in vertical, horizontal and block groups
- Roofs with pitches from 15Deg to 90Deg for depths V
- Depths in the roof construction V - (0cm)
- Flashing - ELJ - Recessed Style
- For non-interlocking slate up to 10mm thick
- ideal for fitting windows within slated roofs coverings up to 10mm thickness
- Applied as standard to individual windows in the slope of the roof
- window units combined for J depth horizontal only
- Roofs with pitches from 20Deg to 90Deg for depths J
- Depths in the roof construction J - (–3cm)
- Flashing - EPV
- For plain tiles up to 16mm thick
- Ideal for a fit between windows and heavy tiled roof coverings such as plain tiles, shingles
- Applied to roof coverings of up to 24 – 32 mm thickness
- For individual windows in the slope of the roof
- Window units may also be combined in horizontal, vertical and block groups
- Roofs with pitches from 25Deg to 90Deg for depths V
- Depths in the roof construction V - (0cm)
- Flashing - EPJ - Recessed Style
- For plain tiles up to 16mm thick
- Ideal for a fit between windows and heavy tiled roof coverings such as plain tiles, shingles
- Applied to roof coverings of up to 24 – 32 mm thickness
- For individual windows in the slope of the roof
- Window units may also be combined in horizontal, vertical and block groups
- Roofs with pitches from 30Deg to 90Deg for depths V
- Depths in the roof construction J - (-3cm)
- Flashing - EHN-A
- For interlocking tiles up to 90mm profile
- Suitable for the water tight connection of roof windows with roof coverings such as roof tiles and high profile metal sheeting
- Applied to roof coverings with a profile depth of up to 90 mm and is applied to individual windows in the slope of the roof
- Used as module flashing for windows installed in horizontal and vetrtical combinations or block groups
- The flashing is available for one installation depth, allowing installation of windows at a level N (+3)
- Can be used on roofs with pitches between 15Deg and 90Deg
- Flashing - ELV-T Thermo universal
- For non-interlocking slate up to 10mm thick
- ideal for fitting windows within slated roofs coverings up to 10mm thickness
- Applied as standard to individual windows in the slope of the roof
- window units combined for V depth in vertical, horizontal and block groups
- Roofs with pitches from 15Deg to 90Deg for depths V
- Depths in the roof construction V - (0cm)
- Additional thermal insulation
- Flashing - EHV-AT Thermo
- For interlocking tiles up to 90mm profile
- Ideal solution which guarantees tight and warm connection of the window with the roof covering
- Insulation of the window above the level of battens
- Glued flexible insulating material which adheres tightly to the window frame constituting a thermo-insulated frame
- Enhances U value of the window up to 15 Percent
- Used with all types of roof coverings up to 90 mm profile depth
- Applied as standard to individual windows in the slope of the roof The flashing may also be used as module Roofs with pitches from 15Deg to 90Deg for depths V
- Depths in the roof construction V - (0cm)
- Additional insulation
- Flashing - EZA
- Lifts windows out of the roofline by 10 degrees
- Flashing for changing window installation angle
- Flashing is ideal for a flush fit of the window with low pitch roof coverings of 10Deg or more
- Enables the installation angle to be raised by an additional 10Deg
- Used in mansard roofs, in extensions and adaptations of low pitched attics in order to extend space in the attic
- Commonly used to install with single windows in roof slopes
- The flashing is also used in modules for horizontal joining of the windows
- Profiled covering up to 45mm, for use with roof tiles and profiled sheeting
- Used on roofs with pitches between 10Deg and 75Deg
- Flashing - ESA
- Lifts windows out of the roofline by 10 degrees
- Flashing for changing window installation angle
- Flashing is ideal for a flush fit of the window with low pitch roof coverings of 10Deg or more
- Enables the installation angle to be raised by an additional 10Deg
- Used in mansard roofs, in extensions and adaptations of low pitched attics in order to extend space in the attic
- Commonly used to install with single windows in roof slopes
- The flashing is also used in modules for horizontal joining of the windows
- Flat covering with a profile depth of 10 mm, for use with slates and similarly flat roof coverings
- Used on roofs with pitches between 10Deg and 75Deg
- Flashing - EHA
- Lifts windows out of the roofline by 10 degrees
- Flashing for changing window installation angle
- Flashing is ideal for a flush fit of the window with low pitch roof coverings of 10Deg or more
- Enables the installation angle to be raised by an additional 10Deg
- Used in mansard roofs, in extensions and adaptations of low pitched attics in order to extend space in the attic
- Commonly used to install with single windows in roof slopes
- The flashing is also used in modules for horizontal joining of the windows
- Profiled covering up to 90mm, for use with roof tiles, corrugated and deep profiled sheeting
- Used on roofs with pitches between 10Deg and 75Deg
Fakro Z-Wave Electric Center Pivot FTP Natural Pine Roof Window
RRP: £1157.23
Save 50%
£578.62
Thank you for feedback
We will soon verify the details and add your feedback appropriately.
